Select Engineered Systems SG2CL User Programming Manual page 14

Select Engineered Systems - Cellular Select Gate Programming Guide
Status Requests (cont.)
Command Command Text
Name
*21#
Check
Stored
Numbers
(Rollover
and Caller
ID phone
Example: Check Stored Numbers:
numbers)
Text = *21#
Example Response: O19545551212,13058235410E
Check Relay
*22#
Status
Example: Check Relay Status:
Text = *22#
Example Response: Relay1=OFF,RELAY2=OFF, Detect=OFF
Check stored *24*PPPP#
PINs/Cards
(PPPP=password e.g.
1234)
Example: Check Stored PINs/Cards:
Text = *24*1234# (Assumes existing programming password of "1234")
Response: 17234,101000080,201008005,200503434E
Meaning:
Relay 1 operates when pin 7234 is entered.
Relay 1 operates for card with site code 010 and card 00080.
Relay 2 operates for card with site code 010 and card 08005.
Relay 2 operates for card with site code 005 and card 03434.
E= End
Text (SMS) Response
Accepted: Responds with number list:
O [number]...,I [number]...E
Call Button Numbers follow the O
Caller ID numbers follow, possibly preceded by an optional I
E = End of list (If no numbers are stored, just E is sent)
Not Accepted:
Error response (see Sec. 2.10, Fig 8)
Accepted: Responds with relay1 and relay2 status, and status of
Detect (door sense switch if used)
Not Accepted:
Error response (see Sec. 2.10, Fig 8)
Accepted: Responds with list of relay and associated PIN/card
numbers. Format Relay[Number]...Relay[Number] where
[Number] is either a PIN (4-digits) or a card (8-digits= site code
(3 chars) + card number (5 chars).
E = End of list (If no numbers are stored, just E is sent)
Not Accepted:
Error response (see Sec. 2.10, Fig 8)
Page 13 of 30
2019_03_D