To Use Optical / Hdmi Arc Mode; Respond To Your Tv Remote Control; Sound Setting; System - Harman JBL CINEMA SB160 Owner's Manual

3. To use OPTICAL / HDMI ARC mode

Ensure that the unit is connected to the TV or audio device.
1. Press the button repeatedly on the unit or press the
OPTICAL, HDMI buttons on the remote control to select the
desired mode.
2. Operate your audio device directly for playback features.
3. Press the VOL +/– buttons to adjust the volume to your desired
level.
Tip: While in OPTICAL/HDMI ARC mode, if there's no sound
output from the unit and the status Indicator flashes, you may
need to activate PCM or Dolby Digital Signal output on your
source device (e.g. TV, DVD or Blu-ray player).
7. Respond to Your TV Remote
Control
Use your own TV remote control to control your soundbar
7a. For other TVs, do IR remote learning
To program the soundbar to respond to your TV remote control,
follow these steps in Standby mode.
1. Press and hold VOL+ and SOURCE button for 5 seconds on
soundbar to enter learning mode.
• The Orange indicator will Fast flash.
Learning POWER button
2. Press and hold the POWER button for 5 seconds on the
soundbar.
3. Press the POWER button twice on the TV remote control.
Follow the same procedure (2-3) for VOL- and VOL+. For mute,
press bloth VOL+ and VOL- button on soundbar and press MUTE
button on TV remote control.
8
>5 s
flash quickly
>5 s
TV
SOURCE
x 2
TV Remote Control
4. Press and hold VOL+ and SOURCE button for 5 seconds on
soundbar again and now your soundbar respond to your TV
remote control.
• The Orange indicator will flash slowly.

8. SOUND SETTING

This section helps you choose the ideal sound for your video or
music.

Before you start

• Make the necessary connections described in the user manual.
• On the soundbar, switch to corresponding source for other
devices.

Adjust the volume

• Press VOL+/- button to increase or decrease a volume level.
• To mute sound, press MUTE button.
• To restore the sound, press MUTE button again or press VOL+/-
button.
Note: While adjusting the volume, the status LED indicator will
flash quickly. When the volume has hit maximum/minimum value
level, the status LED indicator will flashes once.
Select Equalizer (EQ) Effect
Select predefined sound modes to suit your video or music.
Press the (EQ) button on the unit or press the MOVIE / MUSIC
/ NEWS button on remote control to select your desired preset
equalizer effects:
• MOVIE: recommended for viewing movies
• MUSIC: recommended for listening to music
• NEWS: recommended for listening to news

9. SYSTEM

1. Auto standby

This soundbar automatically switches to standby after 10
minutes of button inactivity and no audio/video play from a
connected device.

2. Auto wake up

The soundbar is powered on whenever a sound signal is
received. This is most useful when connecting to the TV using
the optical cable, as most HDMI™ ARC connections enable
this feature by default.
>5 s
flash slowly