Download Print this page

Use Of Your Barbecue - BORETTI LUCIANO NERO User Manual

Advertisement

3

Use of your barbecue

3.1 General information
Even though all gas connections on the barbecue are tested for leakages before transport, a
complete test must be carried out at the assembly site. During transport or assembly, parts of the
barbecue may have been moved. It is also possible that the gas pressure on the equipment is too
high. Regularly inspect the entire system for leaks and check the system immediately in the event
that you smell gas.
3.2 Gas leak test
Always carry out a gas leak test before use of the barbecue and when the barbecue has not been
used for some time.
Extinguish any open fires (DO NOT SMOKE when testing for leaks).
Never carry out this gas leak test near open flames.
Make a soapy solution made up from equal parts of water and liquid soap or gentle washing-
up liquid
Follow the steps below:
1. Turn the control knobs of the burners to off.
2. Remove the battery from the electronic ignition.
3. Open the gas bottle.
4. Apply the soapy solution to all connections of the gas supply. If no soap bubbles are
formed, there is no gas leak. If soap bubbles start to form on a connection, this indicates
a leak. In the event that you detect a leak, turn the gas supply off immediately, tighten
the leaking connections firmly, open the gas bottle again and repeat steps 1 through to 4.
5. Turn the gas supply off.
6. Turn the control knobs of the burners on for 10 seconds to let the pressure escape from
the hose and then turn the control knobs to off again.
7. Remove the soapy solution from the connections of the equipment with cold water and
rub dry with a cloth. Check all gas supply connections before every use and do the same
when the gas bottle is being connected to the gas pressure regulator.
It is recommended that you check the gas hose for leaks every year, even if the gas
bottle has never been disconnected from the equipment.
Note: Ensure that you test all loose connections (including the side burner) and, if required,
tighten them again when you are testing the equipment for leaks. Even a small leak in the
system can result in a dangerous situation.
Note: These days, most gas bottles are fitted with a mechanism that detects leaks inside the
container. When the gas is being released too quickly, this mechanism cuts off the gas
supply. A leak can severely restrict the gas supply which will make it difficult to light the
barbecue.
Note: If you are unable to close off a gas leak, then turn off the gas supply and contact your
sales outlet. Even a small leak can cause a fire.
Note: If, after several attempts, you are unable to light the barbecue, then contact your sales
outlet.
Note: Ensure that the control knobs are in the "OFF" position when you are not using the
equipment.
8

Hide quick links:

Advertisement

loading