BORETTI LUCIANO NERO User Manual page 13

4.4 Stainless-steel
After the first time of use, parts of the barbecue may become discoloured by the intense heat that
comes from the burners. This is normal.
Purchase a cleaning product for stainless steel and use this when brushing the metal down. It may be
possible for grease spots to fall on the stainless-steel parts and get burnt on, which may cause some
parts to look worn. Use a cleaning product that is not abrasive together with a cleaning product for
stainless steel, to remove the grease.
4.5 Changing the battery on the ignition (if present)
Turn the knob on the ignition loose and remove the AA battery. Put a new AA battery in place.
4.6 Enamel parts
Some of the parts on the barbecue have an enamel coating. Enamel is a glass-based product and is
very durable and resistant to wear. However, it is not resistant to shocks and knocks, which may
cause hairline cracks. The hairline cracks can lead to small pieces of enamel breaking off, which leads
to rust forming. The performance of your barbecue will not be affected by the broken off pieces or
hairline cracks. No claims can be made regarding damages to the enamel in the cooking area after
use.
4.7 Ventilation
The burners can only function properly if the heat they produce can escape as well. If this is not
possible, then the burners may not get enough oxygen, which may cause backfiring, especially if the
burners are set to "HIGH". If this happens regularly, it may cause the burners to develop cracks. For
this reason, there are ventilation openings around the barbecue. These allow the hot air to escape.
Always ensure that there is sufficient space around the cooking area (the racks will allow sufficient
space). Never cover the ventilation openings with aluminium foil or other materials that can impede
the airflow. NEVER allow the cooking surface to be completely covered, for instance by a large pan or
by completely filling it with grill trays.
4.8 Replacing the gas hose
The gas hose should be replaced every two years. Rubber gas hoses can dry out which may result in
gas leaks.
12