Fuel Connection; Installation Location Of Metering Pump - Webasto Thermo Top E Installation Instructions Manual

Fuel Connection

CAUTION!
Open the vehicle's fuel tank cap, ventilate the tank and then re-close the tank lock.
Catch any fuel running off with an appropriate container.
Install fuel line and metering-pump wiring harness so that they are protected against stone impact.
Unless specified otherwise, always fasten using cable ties.
Mount the fuel line and wiring harness with rub protection on sharp edges.
WARNING!
The fuel line and wiring harness are routed to the metering pump in as shown in the wiring harness
routing diagram.
1
3
1 2
1 2
2
27
3 4
28
6
3
29
Hyundai Sonata
Ensure proper installation position of
metering pump, see "Installation
Instructions".
Installation location on left next to vehicle fuel
tank.
1 Original vehicle bolt
2 Silentblock, M6 flanged nut
3 Angle bracket
Fuel line from heater unit on pressure side of
metering pump [side with connector].
1 Metering pump
2 Rubber-coated p-clamp on silent block, M6
5
flanged nut
3 Wiring harness of metering pump,
protective rubber plug, tab connector,
connector housing
4 Mecanyl fuel line
5 Included hose section as protection
6 Hose section, 10 mm dia. clamp [2x]
1 Mecanyl fuel line
2 Metering pump wiring harness
3 Cover for fuel lines
i
Installation
location of
metering
pump
Installing
metering
pump
Installing
lines
19