Table of Contents
Advertisement
SET-UP MENU
3-3. RECORD TIME>
At the EVENT SETUP menu,
① Turn the SHUTTLE ring to select the EVENT RECORD SETUP>.
② Press the ENTER button. The EVENT RECORD SETUP> menu screen appears.
[RECORD TIME]
[EVENT RECORD TIME]
CH 1 : 1 MIN
CH 2 : 1 MIN
CH 3 : 1 MIN
CH 4 : 1 MIN
CH 5 : 1 MIN
CH 6 : 1 MIN
CH 7 : 1 MIN
CH 8 : 1 MIN
3-3-1. EVENT RECORD TIME
At the EVENT RECORD TIME> menu,
① Turn the SHUTTLE ring to select the channel, and then turn the JOG
dial to set the Recording time.
② Turn the SHUTTLE ring to go to another menu in the EVENT RECORD TIME> or press
the ESC button to escape from the RECORD TIME>.
DVR will start recording per the following periods, in accordance with the users setting when an Event has occurred.
(2~10, 20, 30 second / 1, 2, 3, 4, 5 minutes / Manual / None)
3-3-2. PRE-RECORDING TIME
At the EVENT RECORD TIME> menu,
① Turn the SHUTTLE ring to the end of the right(left) to display the second page of
PRE-RECORD TIME, and then turn the JOG dial to select ON or OFF of the each channel
and to set the pre-recording time.
② Turn the SHUTTLE ring to go to another menu in the EVENT RECORD TIME> or press
the ESC button to escape from the EVENT RECORD TIME>.
[RECORD TIME]
[PRE - RECORD TIME]
CH 1 : ON
CH 2 : ON
CH 3 : ON
CH 4 : ON
CH 5 : ON
CH 6 : ON
CH 7 : ON
CH 8 : ON
PRE-RECORDING TIME: 5sec
When video loss or alarm is detected, the recorder will store the selected period of pre-recorded data.
( The pre-recording time can be set from 1 to 5 second)
NOTE: Pre-Recording is not valid if any channel is being recorded in normal recording Mode.
44
1/2
CH 9 : 1 MIN
CH 10 : 1 MIN
CH 11 : 1 MIN
CH 12 : 1 MIN
CH 13 : 1 MIN
CH 14 : 1 MIN
CH 15 : 1 MIN
CH 16 :1 MIN
2/2
CH 9 : ON
CH 10 : ON
CH 11 : ON
CH 12 : ON
CH 13 : ON
CH 14 : ON
CH 15 : ON
CH 16 : ON
USER'S MANUAL
Advertisement
Table of Contents
