Samsung SVR1620 User Manual page 40

Hide thumbs Also See for SVR1620:
Table of Contents

Advertisement

SET-UP MENU
2-2-3. PLAYBACK MODE
① Turn the SHUTTLE ring to select the PLAYBACK MODE.
② Turn the JOG dial to select the Playback mode between three choices.
(AUTO / FRAME / FIELD MODE.)
③ Turn the SHUTTLE ring to go to another menu in the RECORD MODE SETUP> or press the
ESC button to exit the RECORD MODE SETUP>.
AUTO MODE : DVR will automatically select playback in frame (two fields) or field to avoid moving artifact.
(Recommended)
FRAME MODE : The DVR will playback images in frame mode which is useful for recorded images in
high frame rate. This may occurs moving artifact with recorded images in low frame rate.
FIELD MODE : The DVR will playback images in field mode. This reduces the resolution, but is suitable
2-2-4. REPEAT RECORD
① Turn the SHUTTLE ring to select the REPEAT RECORD.
② Turn the JOG dial to set ON or OFF.
③ Turn the SHUTTLE ring to go to another menu in the RECORD MODE SETUP> or press the
ESC button to exit the RECORD MODE SETUP>.
ON:
The recorded data will be over written, when the internal HDD(s) is fully recorded.
OFF: Stop-recording, even if the internal HDD(s) is fully recorded.
2-2-5. IMAGE QUALITY
① Turn the SHUTTLE ring to select the IMAGE QUALITY>.
② Press the ENTER button. The IMAGE QUALITY level control screen appears.
[IMAGE QUALITY SETUP]
- AUDIO RECORD :
(LOW)
|
|
|
RECORD TIME : 0 – DAY
TOTAL
TIME : 0 – DAY
③ Recording Capacity will be shown on the bottom of the screen once you set the Image
Quality by turning the JOG dial.
④ Press the ESC button to exit this menu.
In the IMAGE QUALITY SETUP mode, the preview of the recording image quality will be shown on the screen
upon changing the quality level from 1 to 8.
Although, the DVR is on the recording ENTER, you can still change the quality level but the preview of the image
quality is not available.
○ a RECORD TIME: According To the selected Image quality, the remaining capacity of recording
○ b TOTAL TIME:
40
for recorded images in low frame rate.
ON
V
|
|
|
|
|
(HIGH)
8
0 – H
0 – M
0 – H
0 – M
time will be shown in this section.
With the internal HDD(s), the total capacity of recording time will be
shown in this section.
a
b
USER'S MANUAL

Advertisement

Table of Contents
loading

Table of Contents