Advertisement
D E S C R I P T I O N O F F U N C T I O N S
C H A N N E L S T R I P S
GAIN
Controls the input level of each channel. An LED meter is provid-
ed on each of the 3 channels.
HI, MID, LOW (EQ)
Individual controls for high frequency, midrange, and low fre-
quency equalization with +9dB/Kill adjustments. Note: Any
changes made to EQ settings will change the overall output
level.
CURVE
The Line Fader Curve Control adjusts the curve of the input
faders between short, mid, or long fade.
PAN
Controls left/right output balance of each channel.
REV
Reverses the direction of each line channel fader. When the line
fader reverse function is engaged, the volume for that channel
will be full when the fader is down. As the fader moves upward,
the volume will decrease.
FX
This is an ON/OFF switch for the effects loop. The level is con-
trolled by the Send and Return knobs. See Master Section for
details.
INPUT SELECT
These toggle switches select the input source between phono
and line for each channel. The FLASH position can be used for
transforming and scratching effects.
LINE FADER
Controls the output volume of each channel. The signal is routed
to the line faders after the gain, EQ, pan, and effects.
Advertisement
