Specifications; Standard Equipment - Virutex RV70U Operating Instructions Manual

girse al Servicio Oficial de Asistencia Técnica VIRUTEX.
14. RECICLAJE DE LAS HERRAMIENTAS ELÉCTRICAS
Nunca tire la herramienta eléctrica con el resto de resi-
duos domésticos. Recicle las herramientas, accesorios y
embalajes de forma respetuosa con el medio ambiente.
Respete la normativa vigente de su país.
Aplicable en la Unión Europea y en países europeos
con sistemas de recogida selectiva de residuos:
La presencia de esta marca en el producto o en el
material informativo que lo acompaña, indica que al
finalizar su vida útil no deberá eliminarse junto con
otros residuos domésticos.
Conforme a la Directiva Europea 2002/96/CE los usuarios
pueden contactar con el establecimiento donde adquirie-
ron el producto, o con las autoridades locales pertinentes,
para informarse sobre cómo y dónde pueden llevarlo
para que sea sometido a un reciclaje ecológico y seguro.
VIRUTEX se reserva el derecho de modificar sus productos
sin previo aviso.
E N G L I S H
RV70U TRIMMING MACHINE
Important
Read these OPERATING INSTRUCTIONS
and the attached GENERAL SAFETY
INSTRUCTIONS LEAFLET carefully before
using the machine. Make sure you have
understood them before operating the
machine for the first time.
Keep both sets of instructions for any
future queries.

1. SPECIFICATIONS

Universal motor with smooth starting and overload
protection
Input power...................................................................1700 W
No-load speed..............................................................3300/min
Max. cutting depth with saw blade..........................68 mm
Max. cutting depth with diamond-tipped blade......58 mm
Height of the cut from the base...................................7 mm
Weight..................................................................6.6 Kg
Weighted equivalent continuous acoustic
pressure level A.................................................................91 dBA
Acoustic power level A....................................................102 dBA
Uncertainty......................................................................K = 3 dBA
Wear ear protection!
Vibration total values..............................................a
Uncertainty....................................................................K: 1.5 m/s
2. SAFETY INSTRUCTIONS FOR
USING THE MACHINE
• Before plugging in the machine, ensure that the
power supply voltage corresponds to what is stated on
the machine's characteristics plate.
Danger, keep hands clear of the working area.
Always hold the machine with both hands on the
handgrips.
• Ensure that the machine slides back freely without
getting stuck. Never block the recoil mechanism.
Use only original blades as replacements for the saw
blade or the diamond-tipped blade.
• Do not use saw blades that are warped or damaged.
Do not use blades made of self-hardening steel.
Unplug the machine from the electrical outlet before
performing any maintenance operations.
To change the cutting blade or perform any operation
near it, release the power switch and disconnect the
machine from the power supply.
• Always wear eye and hearing protection when working
with the machine.
Wear close-fitting work gear, leather gloves in your
own size, and safety footwear. Do not wear jewellery,
scarves, ties, open work coats or other similar garments.
• Never use the machine where there are liquids or
excessive moisture.
When changing tools or carrying out any other operation
near the cutting chain, take your hand away from the
on/off lever and unplug the machine from the mains.
SPARE PARTS: Only use genuine spare parts.

3. STANDARD EQUIPMENT

The box contains the following items:
RV70U Trimming Machine
Hard metal saw blade D.200 12Z. Assembled.
Hard metal saw blade D.200 30Z for nails (optional
accessory)
Diamond-tipped blade D. 180 7040329.
Full front fence.
5 mm Allen key.
3 mm Allen key.
Dust collection tube set 7045832.
Operating instructions and miscellaneous documen-
tation.
: < 2.5 m/s
2
h
2
7