Usb Output - Pioneer XDP-30R Instruction Manual

> Before Start > Part Names

USB Output

1
OTG Cable
You can connect a headphone ampli ier or
D/A converter or e ample that has a USB
connector. You ill need a USB OTG (On-
The-Go) cable (commerciall available) to
connect to this unit. Make sure ou have
the correct t pe o USB cable or the USB
port o the device ou are connecting to the
OTG cable. I it is a micro USB port
can use the USB cable included ith this
unit.
This unit is compatible ith the ollo ing
devices. (As o December 2017)
Headphone ampli ier : XPA-700 DAC-
HA300
0 I the attached USB-DAC does not
support DoP stream pla back and
attached devices ma be adversel
a ected.
onne tin e i e
1. Connect this unit to the device ou are
connecting using an OTG cable etc.
Make sure ou plug the cable in the right
a up hen connecting. You ma
20
> Initial Setup
damage the plug or ack i
insert it the rong a .
2. Turn on the po er o this unit and the
connected device. is displa ed on
the status bar on the screen hen this
unit recognizes the connected device.
hen pla ing DSD ormat music iles
0
ou DoP ormat can be output via USB
(P22).
> Playback
2
Library
Line
Out
ou tr to
A n e etup upp ement r
Online
Balanced
n orm tion t er