A N E Etup; Arious Settings - Pioneer XDP-30R Instruction Manual

> Before Start > Part Names

arious settings

Advanced Setup
1
Library Online
Line
Balanced
Out
> Initial Setup
2
Settings
Wi-Fi
Bluetooth
Brightness
Balanced Output Select
Line Out Mode
> Playback
Tap to make settings or i-Fi and BLUETOOTH settings or audio output pass code
settings so t are updates and a variet o other settings.
1. Tap in the home screen.
2. Tap the item ou ant to set.
i i
On : Connection to a net ork via
settings related to i-Fi such as selecting the SSID o the access point to be connected.
O (de ault value) : Connection b
uetoot
On : Enables connection ith a BLUETOOTH ireless technolog enabled device. This
also enables ou to make various settings related to BLUETOOTH such as pairing.
O (de ault value) : hen BLUETOOTH is not to be used
ri tne
You can ad ust the brightness o the screen. The brightness can be set ith the slide bar in
10 steps bet een (1) and
the right (de ault value is ).
n e utput e e t
Use hen balanced headphones are to be connected.
Balanced (de ault value) : Compared to the normal single-ended operation
larger output and the high voltage is not grounded together ith the small signal so ou can
anticipate a superior e ect in the ualit o the music. Because ou get a larger output
can drive headphones ith a higher impedance.
ACG : The basic operating method is the same as Balanced (mode) but uses technolog
to even more orce ull i grounding standards so ou can en o a sound ualit
improved clarit and stabilit than Balanced (mode). Output volume is the same as the
regular single-ended operation ho ever.
0 This unit does not support simultaneous use o the balanced headphone ack and the
headphone ack. Using both acks at the same time ma result in damage.
ine ut o e
On : S itch the headphone output to the line output mode to connect e ternal e uipment.
hen Line Out Mode is on output through the headphone ack is at ma imum volume so
do not use headphones. Ad ust the volume on the connected device.
hen turned on or European models
0
A n e etup upp ement r n orm tion
i-Fi is enabled. This also enables ou to make various
i-Fi is not enabled
(10) . The screen becomes brighter hen ou slide it to
ou can then select either Fi ed (de ault value)
t er
ou can get a
ou
ith
En
21