Getting Started; Preparing The Film; Attach Power Cord; Insert Sd/Sdhc Memory Card (Max. 32 Gb) - Reflecta Super8-Normal8 User Manual

Getting Started

Preparing the Film

If your film is not in good condition (broken, damaged perforation,
misaligned, taped overlaps, bent, thick splices etc.), please check and fix
the problem first.
Before recording, it is good practice to use a lint-free cloth and/or anti-
static film cleaner to remove dirt particles, clean any processing
chemical residues, and to remove any debries on the film in order to
prevent them showing up on recorded videos.

1. Attach Power Cord

Plug in the included DC 12V power adapter.

2. Insert SD/SDHC Memory Card (Max. 32 GB)

Insert the SD/SDHC memory card before powering on the Film Scanner
device.
• Using a MicroSD card with an adapter, or SDXC card (64GB), which is
not compatible with the Film Scanner will lead to a "Card error"
message appearing on the screen. The Film Scanner can only take a
SD/ SDHC memory card of up to a maximum capacity of 32 GB.
• Make sure the SD/SDHC card is unlocked (white tab in forward position).
• Insert and push the SD/SDHC card inward until it clicks. Improper
insertion may damage the card reader or the SD/SDHC Card, which
neither is covered under warranty.
3