Getting Started - Reflecta DigitDia 6000 Manual

GETTING STARTED

Check the package content before getting started.
For Quick Installation please refer to Quick Installation Guide. (Ref. Pg. 6)
Important! Save the original box, receipt and packing material for future
shipping needs.
Package Contents
Slide Scanner.
Magazine.
Power Adapter
USB Cable
Scansoftware CyberView
Application Software
Warning! Using any other power adapter may severely damage the scan-
ner and will void the product warranty.
NOTE:
Application software means the imaging software such as Adobe®
Photoshop® Elements, this is subject to change without notice.
The orange adapter on the transport arm and the arm itself are excluded
from guarantee.
GENERAL GUIDANCE:
Only use the supplied USB-Cable. Connect the scanner to the computer
directly using the USB 2.0 cable.
Do not use a hub or extension cable. Only use the USB ports on the rear
of desktop computers.
If there are any other devices (multifunction device, printers, scanners,
webcam) connected to the computer through USB, disconnect them.
A minimum of 1GB RAM (Win/Mac) is required.
Magic Touch doesn´t work with B&W and Kodachrome Film. You have
to deactivate it.
4