Vax RapidPower PRO ECGLV1B1 Let's Get Started page 13

Lift and hook the latch
on the tank onto the lid
and push down to lock
into place.
Removing and cleaning the nozzle
Remove both tanks and tilt
the carpet washer so its
lying on its back.
To replace the nozzle, hook the tabs on nozzle
with the front of carpet washer and slide the
nozzle into place.
Taking care of your machine
To re-fit, slide the dirty
water tank onto the carpet
washer, making sure
the tabs on the tank line
up with the back of the
washer.
Lift the nozzle release clip
to unlock the nozzle.
Hook the tank release
catch over the front of the
tank and push downwards
to lock the catch in place.
Hold the front of the
nozzle and push down to
release the nozzle away
from the washer. Once
released, lift to remove.
Push the nozzle release
clip to lock the nozzle.
To prevent excessive build up of dirt
/debris in the nozzle, always dry
vacuum before using the carpet washer.
Rinse nozzle under water
(40°C max) to remove dirt
and debris.