Cal Ibra Tio N(Init Ial Ization ) - Hohem BUFF Manual

P ar a m eter s>>
Handle Size
Material
Weight
Folding Size
Pitching Angle
Rolling Angle
Panning Angle
Working Voltage
Overload Current Protection
Battery Life
Adaption
Cal ibra tio n(Init ial ization )>>
If the gimbal has the following situations, please calibrate it:
1) The pitch angle is not perpendicular to the horizontal surface,
2) The roll angle is not parallel to the horizontal surface;
3) Under the lock mode, the panning angle drifting.
Calibration Operation Instruction:
Method 1: Off-line Calibration
(1) Power on the gimbal (around 3 seconds), long press the middle button
of the joystick over 6 seconds till the status indicator light is solid.
(2) Lay the gimbal on a static flat surface; make sure it has no shaking.
Calibration is finish when the status indicator light is continuously
flashing for 3 times.
(3) Power off the gimbal and restart it, if the calibration is unsuccessful,
you Can repeat step(1)(2) to reinitialize.
Method 2: Online Calibration
Please visit our official website http://www.hohem-tech.com, and visit
the SUPPORT to download the calibration software of and operation
introduction to calibrate the gimbal.
87.5*13*13 mm
Aluminium Alloy
415 g (Without battery) 1136 g (Whole package)
300mm * 120mm * 25mm
320°
320°
360°
3.2 V~5.0 V
1 A
2600 mAh / 5 hours
Compatible with iPhone X iPhone 8 plus/ 7Plus/
6s Plus/ 6 Plus, iPhone 8/ 7/6s/ 6, iPhone5s/ 5/ SE
and Android smartphones up to 6.0 inch.
/ 7 /