Optional Connections - Standard Horizon Ff520 Owner's Manual

CPV350
CP175C connections to FF520
1. Cut off the "Tee" connector on the FF520 as close to the "Tee connector as possible.
2. Route the cable from the FF520 to the CP175C location.
3. Strip back the black insulation on the "Tee" cable about three inches to expose the wires
inside the cable. Connect the wires from the CP175C to the FF520 "Tee" cable referring
to Figure 2.2d CP175C Connection.
2.3

OPTIONAL CONNECTIONS

The FF520 has one NMEA output, one alarm buzzer output and a second input for a
temperature sensor.
FF520
Figure 2.2c - CPV350 Connection
Figure 2.2d - CP175C Connection
Figure 2.3 - The FF520 Optional Connections (I)
Tee Cable
F 520 F
Page 11