Setting Up Screen Call - Sanyo SPRINT PCS VISIO SCP-7000 User Manual

Setting Up Screen Call

This feature enables you to screen incoming calls by using a
recorded announcement, either one that is prerecorded or one
that you record. You can also record the caller's message into the
Voice Memo list.
Activating Screen Call
To start Screen Call when you have incoming calls:
When the phone rings or vibrates, press Options (right
softkey) > Screen Call.
To set Auto Screen Call:
1.
Select
2.
Select On and press
3.
Set the answering time by using numeric keys or by
pressing the navigation key up or down.
4.
Press
the standby display.)
Tip: If a new caller's message is waiting,
display. The memos recorded while activating "Screen Call"
are shown with a "
once; " ": not yet played). To listen to the message, see
"Reviewing Voice Memos"on page 133.
Tip:
While the caller's message is being recorded, press
answer the call, or press
disconnect the call.
Section 2H: Using Your Phone's Voice Services
> Tools > Voice Services > Screen Call > Auto.
.
or OK (left softkey). (The
"or " "icon in the list (" ": played
icon is displayed on
appears on the
to stop recording and
to
135