Setting Return To Standby Mode; Sleep Mode - Sanyo SPRINT PCS VISIO SCP-7000 User Manual

Setting Return to Standby Mode

This feature allows you to select the way to return to standby mode.
To set this feature:
1.
Select
2.
A message appears. Press OK (left softkey) to continue.
3.
Select Automatically or End Key.
Automatically to return to standby mode
automatically when no key is pressed for 30 seconds.
End Key to return to standby mode by pressing
Note: End Key setting affects the battery's talk and standby times.

Sleep Mode

This feature helps conserve your battery power by restricting
the display.
To set sleep mode:
1.
Select
2.
Select a sleep mode interval and press
(Select Off to deactivate this feature.)
Section 2B: Controlling Your Phone's Settings
> Settings > Display > Return to Idle.
> Settings > Display > Sleep Mode.
.
.
63