Using Speed Dialing - Sanyo SPRINT PCS VISIO SCP-7000 User Manual

Dialing From the Contacts List
To dial directly from a Contacts entry:
1.
Select
Shortcut:
2.
Highlight the entry you want to call and press
dial the entry's default phone number.
– or –
To dial another number from the entry, highlight the
name and press
wish to call and press
Tip:
You can also place a call by selecting Options (right softkey) >
Call or Call: Speaker On .
Note: The icons next to each entry represent the Contacts labels (for
example, Mobile, Home, Work, etc.). A triangle next to an icon
means there is another label for the entry. Press the
navigation key right or left from the Contacts list to select the
desired label.

Using Speed Dialing

With this feature, you can dial your favorite entries using one
keypress for locations 2–9. (See "Assigning Speed Dial
Numbers"on page 111.)
To use speed dial for voice calls:
From standby mode, press and hold the appropriate key
for approximately two seconds.
– or –
From standby mode, press the appropriate key and press
40 Section 2A: Phone Basics
> Contacts > Find/Add Entry.
Press the navigation key right to list entries.
.
, and then highlight the number you
, or Call (left softkey).
to