Servicing Maintenance Chart: 550 To 1000 Hours Of Operation - Kubota KX61-3 Operating Instructions Manual

Maintenance

Servicing maintenance chart: 550 to 1000 hours of operation

Servicing by skilled personnel or KUBOTA dealer
Servicing
Check coolant hoses and
clamps
Check/adjust the V-belt
tension
Grease the pilot valve linkage
Change the engine oil and oil
filter
Replace the fuel filter
Change the return filter for
the hydraulic oil tank
Replace the drive unit oil
Change the hydraulic oil and
suction filter
Replace the in-line filter
Replace air filter elements 1.)
Change the running gear and
track roller oil
Check the alternator and
starter motor
Check electric cables and
connections
Safety inspection
Change the coolant
Change hydraulic hoses
1.) Under dusty conditions the air filter must be cleaned more frequently or replaced.
2.) When using a breaker over 20% → every 800 h.
When using a breaker over 40% → every 400 h.
When using a breaker over 60% → every 300 h.
When using a breaker over 80% → every 200 h.
3.) When using a breaker up to 50% → every 200 h.
When using a breaker over 50% → every 100 h.
4.) Earlier if necessary.
Elapsed hours of operation
550 600 650 700
4.)
3.)
2.)
Please contact your KUBOTA dealer.
Please contact your KUBOTA dealer.
Please contact your KUBOTA dealer.
Please contact your KUBOTA dealer.
750 800 850 900 950 1000 Interval Page
250 h
250 h
250 h 112
500 h
500 h 102
500 h 103
500 h 112
1000 h 104
1000 h 113
1000 h 101
2000 h
2000 h
annually 112
annually 118
every 2 years 100
every 6 years
98
97
98
--
--
--
95