Repair Work On The Machine - Kubota KX61-3 Operating Instructions Manual

Maintenance
Ambient
temperature
conditions
Diesel
Refrigerant
* This lubricant is filled while manufacturing the engine

Repair work on the machine

Repairs on the machine may only be carried out by trained personnel.
If repairs are carried out on load supporting parts, for example welding on frame parts, the work has to be
checked by a qualified person.
After repairs, the machine should be operated only if it is functioning properly. For this check particular attention
must be paid to the repaired parts and the safety devices.
Recommendation
Quality
Viscosity
standard
EN 590
ASTM D975
HFC134a
Filled at the factory
Brand Type
Note
The fuel filled at the
factory is not winter
diesel. For preparing
the excavator for use
in winter, fill the fuel
tank with winter diesel
and allow the engine to
run for a few minutes.
Never use diesel fuel
with a sulphur content
exceeding 1.00 %.
117