30Gx 207-358 - Carrier 30HXC Series Installation, Operation And Maintenance Instructions

3 - DIMENSIONS, CLEARANCES, WEIGHT DISTRIBUTION (CONT.)

3.4 - 30GX 207-358

1000
1
2
B
Multiple chiller installation (see note 2)
SOLID SURFACE AREA
1525
NOTE: Refer to the certified dimensional drawings supplied with the unit, when designing an installation.
8
A
1
1
SOLID SURFACE AREA
1
2
30GX-207
30GX-227
30GX-247
30GX-267
30GX-298
30GX-328
30GX-358
1000
A mm B mm
30GX207
5996 2895
30GX227
30GX247
6911 2470
30GX267
30GX298 7826 2220
1
30GX328
8741 1250
30GX358
2
Notes:
1. Unit must have clearances for air flow as follows:
Top: do not restrict in any way
2. In case of multiple chillers (up to four units), the
respective clearance between them should be increased
from 1830 to 2000 mm for the side space requirement.
3. Clearances sre required for cooler tube removal.
1525
Clearances required
for operation and maintenance
Clearances required for evaporator tube
removal. Clearances can be either on the left
or on the right hand side.
Water inlet
Water outlet
Power supply
Air outlet - do not obstruct
kg: total operating weight
kg
5540
5570
6134
6365
7354
7918
8124