Engine; Cleaning; Lubrication - GEISMAR STUMEC MP.12 Instruction Manual

5.1.2 Engine

Strictly comply with the manufacturer's instructions.
FILLING ENGINE OIL
- Place the engine horizontally and pour oil up to the upper level
of the oil gauge (approx. 0.9 liter).
- Use diesel engine oil with viscosity of :
- Use diesel engine oil of grade "CC" or "CD" (API ranking).
- lnferior quality en- gine oil and/or lack of oil may cause
an engine trouble or shorter engine life

5.1.3 Cleaning

Make sure that the machine is kept as clean as possible. Care in cleaning
the machine will lead to longer service life and improved performance.
Clean the machine carefully with a clean cloth or an airgun, taking
special care to remove all dirt that has accumulated on it, especially close
to any moving parts. As a precautionary measure, always wear gloves to
avoid injury or burning of hands.
Regularly clean the carrying and guide rollers. Clean both sides of the
machine.

5.1.4 Lubrication

Regularly oil the threads of the different locking levers of the machine.
Each week, fill up the 4 greasers ①, ② and ③ of the machine.
Use one of the recommended greases below:
- TOTAL MULTIS EP 2
- KLÜBER CENTOPLEX 2 EP
Or any other grease complying with norm DIN 51 354 or
ISO.L.XBBFB.00 (grade 00 tacky grease for heavy load gears.
Temperature of use from – 20°C to + 120 ° C).
The thrust ball bearing OP (plan 37 000 KR) of the pin is lubricated for
life with the synthetic grease CASTROL Longtime PD2. If the lubricants
are filled up after operation, please contact us, or use NLGI.2 grease, with
a usage temperature range from -20 to +150°C and complying with the
norm MIL.G23827 A.
5.1
SEASON OR
TEMPERATUR
Spring or Summer or Autumn
104°F (40 "C ) to +50°F (10°C )
+68°F (20°C ) to +14°F (-10° C ) SAE 10W-30
1
MP12_Gb_01601_160222.doc
GRADE
OF OIL
SAE30
OIL GAUGE
Do not use gasoline engine oil.
Use diesel engine oil only.
Do not screw the dip stick in when checking the oil
2
UPPER LEVEL
LOWER LEVEL
3 2
5.1