Placing The Machine On The Track - GEISMAR STUMEC MP.12 Instruction Manual

3.2 Placing the machine on the track

At least two people must be involved when placing the machine on or taking it off track. Nonetheless, if the work area is difficult to access, more people may
be required to ensure safe handling operations.
• To place the machine on the track, proceed as follows:
Take the machine by the carrying handles ① on either side of the machine. Position the machine on the track. The rollers ② and ③ must roll freely on the
rails. If the machine is equipped with a balancing bar (optional), attach it so the roller rolls freely on the rail.
If the machine is equipped with a balancing bar, it must be immobilised (with support) once on the track, to avoid moving and injuring someone in case of
a collision.
THE ENGINE MUST BE OFF WHEN THE MACHINE IS PLACED ON OR TAKEN OFF THE TRACK.
3.2
1
3
MP12_Gb_00575_090701.doc
1
3
2
3.2