Before Use - Panasonic ET-PLF20 Operating Instructions Manual

Before Use

■ Overview
This product suppresses vibration of projection images due to vibration of the lens by fixing the projection lens of
the projector.
■ Supported Lens
ET-D3LEU100 / ET-D3LEW200
■ Supported Projectors
PT-RQ32K, PT-RZ31K, and PT-RS30K series
PT-RQ22K, PT-RZ21K, and PT-RS20K series
PT-RQ13K, PT-RZ12K, and PT-RS11K series
Note
z Models other than the above may also be supported. Refer to the operating instructions of the projector you
are using.
■ Structural components
Part name
Lens fixing attachment
mount bracket
Lens fixing attachment
bracket (A)
Lens fixing attachment
bracket (B)
Lens fixing bracket
Screws and washers
4 - ENGLISH
Appearance (quantity)
Spring washer (M4)
Flat washer (M4)
Thumbscrew (M4 x 10)
Application
This part attaches to the projector unit.
It is a bracket for attaching the lens fixing
attachment bracket
x1
This part attaches to the lens fixing
attachment mount bracket.
It is a bracket for adjusting and fixing the
positions of the lens fixing brackets.
x1
x1
This part attaches to the lens fixing
attachment mount bracket.
They are brackets for fixing the lens.
x4
These are used for bracket assembly and
fixing the lens fixing brackets.
x4
x4
The spring washers and flat washers
are used for the thumbscrews of the
x10
lens fixing brackets.