Attaching The Lens Fixing Attachment - Panasonic ET-PLF20 Operating Instructions Manual

Attaching and Detaching the Lens Fixing Attachment (continued)

Attaching the Lens Fixing Attachment

Screws
Screws
Screws
Lens fixing attachment Lens fixing attachment
bracket (B) bracket (A)
Screws
The illustrations for this procedure use the
PT-RZ21K as an example.
1) Of the screws that surround projection lens at
its four corners (two screws at each corner)
on the front of the projector, remove the inner
screws (four screws total).
z For the following projectors, there is only one
screw at each corner surrounding the projection
lens. Remove the screws at each corner (four
screws total) for these projectors.
PT-RQ32K, PT-RZ31K, and PT-RS30K series
PT-RQ13K, PT-RZ12K, and PT-RS11K series
2) Fix the upper part of the lens fixing attach-
ment mount bracket using two of the screws
that were removed in step 1.
z Tighten the screws at positions where screws
were removed in step 1.
3) Fix the lower part of the lens fixing attach-
ment mount bracket using the remaining two
screws.
z Tighten the screws at positions where screws
were removed in step 1.
4) Attach lens fixing attachment bracket (A) and
lens fixing attachment bracket (B) from the
left and right so that the lens fits between
them as shown in the figure.
z Align the screws of lens fixing attachment
bracket (B) and the grooves of lens fixing at-
tachment bracket (A).
ENGLISH - 7