Wiring - Becker Centronic SunWindControl SWC510 Assembly And Operating Instructions Manual

Caution
Risk of injury due to electric shock. Connection may only be
performed by a qualified electrician!
Secure the connecting cable against slipping out with the
strain relief.
Check the direction of rotation of the tubular drive. Should the direction of ro-
tation be incorrect, swap connecting wires
sensor.
1. Connect the device as follows:
2. Program a transmitter into the receiver (see chapter "Programming the
transmitter")

Wiring

and
brown/black
black/brown
blue
green/yellow
of the tubular drive on the
21 - en