Safety Instructions - Becker Centronic SunWindControl SWC510 Assembly And Operating Instructions Manual

Sun-wind sensor with integrated radio receiver
Hide thumbs Also See for Centronic SunWindControl SWC510:
Table of Contents

Advertisement

Available languages

Available languages

General information
• Please keep the instruction manual safe!
• Only use unmodified original parts from the control unit manufacturer.
• Keep children away from control units.
• Observe all pertinent country-specific regulations.
Caution
Risk of injury due to electric shock.
Connections to the 230 V mains must always be per-
formed by an authorised specialist.
Disconnect the connecting cable from the power prior to
installation.
Keep people out of the system's range of travel.
If the system is controlled by one or more transmitters,
the system's range of travel must always be visible during
operation.
When connecting the control cables (protected extra-low
voltages), only use cables with sufficient electrical
strength.
Observe the specifications for the sun protection system.
18 - en

Safety instructions

Advertisement

Table of Contents
loading

Table of Contents