OmniPod PODDER Resource Manual page 39

Upload Omnipod
PDM Data to a Computer:
To upload glucose readings, insulin and carb data from your Omnipod
System PDM to your PC or Mac Computer, you will need an Omnipod
System USB Cable, which was included in your Omnipod
Starter Kit.
If you need a new cable, order it here: http://shop.glooko.com/
products/insulet-provided-glooko-subscription
+ This cable is at no charge to Omnipod
1. On your computer, open your Internet browser and go to: my.glooko.com.
2. Log into your Glooko account by entering in your Email and Password. Click Sign in.
3. Use the top navigation bar to open Settings.
4. Scroll down to a section called Apps & Devices. Click Upload Omnipod
5. Connect your Omnipod
• Plug the USB side of the cable into your computer.
• Plug the Mini-USB side into your Omnipod
* Note: To upload data from your Omnipod
mid-2012 utilizing Apple
USB Hub:
• Plug the USB Hub into your computer
• Plug the USB side of the Omnipod
• Plug the other end of the Omnipod
6. After connecting the Omnipod
PDM to prepare your data file. Your Omnipod
7. On your computer, click Upload.
8. Your Omnipod System PDM data file will appear in your Finder Window, displayed as a new
®
drive (likely labeled as "NO NAME" on Mac or "Removable Disk/USB Drive" on PC). Click on the
associated drive.
9. In the drive, open the .ibf file: click on it and then click Open in the Finder Window.
10. Click Done to stay on the Settings page or click View Data to see your Daily Overview.
Insulin Management System
®
System users (standard S&H rates apply).
®
System PDM to your computer using the Omnipod
®
System PDM.
®
System PDM to Mac computers manufactured before
®
's OS X El Capitan software (version 10.11), it is recommended to use a
®
System USB Cable into the USB Hub.
®
System USB Cable into your Omnipod
®
System PDM to your computer, wait for the Omnipod
®
®
INSULET PROVIDED GLOOKO
®
®
System
®
System PDM display will say "USB device ready".
Data.
®
System USB Cable:
®
System PDM.
®
System
®
37