Joy Sport Classic User Manual page 13

10
STEP 3
1. PLACE 60*50mm BUSHING(7) ONTO BOTH ENDS OF BACK CUSHION
ADJUSTMENT BEAM(25). THEN INSERT CENTRAL BRACE (10) INTO BACK
CUSHION ADJUSTMENT BEAM(25) SECURE WITH POP PIN(26).
11
59
STEP 4
1. ATTACH THE HOLE-SIDE OF THE BACK CUSHION FRAME (11) ONTO
EACH ONE END OF THE TWO PIVOTS ON THE BACK CUSHION
ADJUSTMENT BEAM(25).THE OTHER SIDE REST AGAINST THE BACKREST
SUPPORT TUBE(4).
2. SECURE BACK PAD(12) TO BACK CUSHION FRAME (11) WITH BOLTS(22).
3. ATTACH SEAT CUSHION FRAME(23) TO BACK CUSHION ADJUSTMENT
BEAM(25). ATTACH MODULATE(27) TO SEAT CUSHION FRAME (23). PUT
MODULATE(27) ON BACK CUSHION ADJUSTMENT BEAM(25).
4. SECURE SEAT(13) TO SEAT CUSHION FRAME (23) WITH BOLTS(22)AS
SHOWN.
7
25
26
7
12
59
22
22
13
23
59
22
25
10
27