Wall Mounting - Omicron Lab TICRO 100 Quick Start Manual

3.2

Wall mounting

A wall mounting kit with four mounting brackets is provided on delivery for mounting TICRO 100 on flat
surfaces, for example on a wall.
Please observe the instructions included in the wall mounting kit for attaching the mounting brackets to
TICRO 100. Proceed as follows:
1. At the desired mounting positions for the mounting brackets, remove two sealing plugs on the rear
side and two sealing plugs on the front side of TICRO 100.
2. Unscrew the four uncovered screws from TICRO 100.
3. Insert the four sealing rings included in the mounting kit to the mounting holes of TICRO 100.
4. Fasten the mounting brackets using the delivered 22 mm long screws as shown below.
5. Mount TICRO 100 to the wall.
Remove 2 sealing plugs
from the mounting holes
on the rear side
Wall mounting kit
OMICRON
Remove 2 sealing plugs from the
mounting holes on the front side
Mounting
TICRO 100 with mounting brackets
15