Mounting Methods For Frameless Bifacial - Canadian Solar CS3U-MB-FG Installation Manual

cs3K-mB-fG and cs3K-PB-fG
A
A
Use 4 clamps on the long side.
Mounting rails run parallel to the long side frame.
Clamp length 100 mm ≥
A = 390 ± 20 mm
Maximum Load:
Uplift load ≤ 2400 Pa
Downforce load ≤ 2400 Pa
A
A
Use 6 clamps on the long side.
Mounting rails run parallel to the long side frame.
Clamp length 100 mm ≥
A = 250 - 300 mm
Maximum Load:
Uplift load ≤ 2400 Pa
Downforce load ≤ 3600 Pa
6.2
mountInG metHods foR fRameless
BIfacIal douBle Glass module (sInGle-axIs
tRacKeRs)
· The clamps used in this section should follow the
requirements in 6.1.
A
A
Use 4 clamps on the long side.
Mounting rails run parallel to the long side frame.
Clamp length
A = 390 ± 20 mm
Maximum Load:
Uplift load
Downforce load
A
A
Use 4 clamps on the long side.
Mounting rails run perpendicular to the long side frame.
(Keep suitable clearance between mounting rails and
module back side)
Clamp length
A = 390 ± 20 mm
Maximum Load:
Uplift load
Downforce load
A
A
≥ 200 mm
≤
2400 Pa
≤ 3600 Pa
A
A
≥ 200 mm
≤ 2400 Pa
≤ 5400 Pa
| 15
A
A
A
A