Advertisement
CLEANING
1
Each Paint Canister has tiny holes that the paint
comes out of. If these holes get blocked you
can't paint. The Cleaning Tool unblocks the
Paint Holes. To use the Cleaning Tool, insert as
shown. Align half-moon curve on the Paint
Canister with the docking curve in the Cleaning
Tool.
2
Wiggle the Paint Canister until the raised Center
Circle on the Paint Canister lid fits snugly into
the half circle in the Cleaning Tool base.
Raised Center Circle
• Remove the Arm Cover, Trays, Clear Dome and Paint Canisters from Paint Sensation
• Rinse or soak each one with warm water and soap.
• Hold the Arm Cover upside down under warm running water.
• Rinse until all parts are clean.
• Allow to dry.
Half Moon Curve
Paint Hole
Half Circle
3
Press the button on the Cleaning Tool to clean
the hole.
Always release button on the Cleaning Tool
before removing Paint Canister from the
Cleaning Tool. Repeat to clean the second
hole in the Paint Canister.
WARNING: Cleaning Tool contains a
functional sharp point.
Cleaning Tool
™
.
Press Button
to clean Paint Hole
Advertisement
