Summary of Contents for Spin Master Paint Sensation
Page 1
• Paint on whatever you can fit into the Spinning Tray! Please remove everything from the packaging and compare to the contents shown on this page. If any items are missiont, please call Spin Master’s customer care hotline: 1-800-622-8339. Product and colours may vary.
Page 2
ASSEMBLY A. Raise the Paint arm to an upright position. Key Hole Slot Paint Arm A. Remove lid. Fill Paint Canister 3/4 full. B. Push down until the Arm Cover clicks into position. Arm Cover Note: The orange gear in the centre of the canister must face the axle.
Page 3
ASSEMBLY (CONTINUED) Cover the Paint Canister with the Clear Dome, turning it clockwise, until it locks into place. Pull the Control Arm out and position the Bottom Paint Tray into the slot in the centre of the control arm, as shown. Control Arm Bottom Paint Tray Place Spinning Tray into the Bottom Paint...
Page 4
Or hold the swirl button down for longer bigger swirls. Try experimenting with each of the 3 controls. Experimenting will lead you to discover how to make endless designs with Paint Sensation “ON/OFF” Switch ™ ! Paint Sensation ™...
Page 5
CLEANING • Remove the Arm Cover, Trays, Clear Dome and Paint Canisters from Paint Sensation • Rinse or soak each one with warm water and soap. • Hold the Arm Cover upside down under warm running water. • Rinse until all parts are clean.
SAFETY TESTED. Remove all packaging material before giving the toy to your child. Please retain this information for future reference. Spin Master Ltd., 450 Front Street West, Toronto, ON M5V 1B6 Canada Web: www.spinmaster.com Email: toys@spinmaster.com Manufactured for and distributed by Spin Master Ltd.