Mil Status - Actron 9640 User Manual

Using The Scan Tool
Entire Data List
The Entire Data List shows all
supported parameter identification
(PID) data for the vehicle being tested.
When the scan tool makes a recording,
the data from all supported PIDs are
stored in the scan tool.
Custom Data List
The Custom Data List allows you to
select certain PIDs from the Entire Data
List, such as those PIDs that pertain to
a specific driveability symptom or
system. The scan tool asks if you want
to view the instructions.
3
Once in the Custom Data List menu,
follow the instructions described below.
A « symbol will be displayed next to all
selected PIDs. Use the UP/DOWN
arrow keys to scroll through the list.
• Use the UP/DOWN arrow keys to move up and down through the list.
• UP arrow: Moves the cursor up the data list.
• DOWN arrow: Moves the cursor down the data list.
• RIGHT arrow: Selects or deselects a data parameter. All selected data
values are marked with
• LEFT arrow: Deselects all marked data parameters.
• ENTER key: Starts playing back data, recording data, or displaying selected
data parameters.
Once in the Custom Data List selection screens, follow the instructions
described above to build a Custom Data List. Data parameters or Parameter
Identification Data (PID) will follow in alphabetical order.
When you are done selecting the PIDs, press the ENTER key to view selected
PID values. Press the BACK key twice to return to the Select Data To View
menu.
View Data Setup
View Data Setup changes the number
of lines shown on the screen. Selecting
fewer lines provides faster update
speeds. The default is four-line display.
3 – 12 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Select Data To View
` Entire Data List
Custom Data List
View Data Setup
For Creating Custom
Select Custom List
« MIL STATUS
`
«
symbol.
Select Data To View
Entire Data List
Custom Data List
` View Data Setup
View Instructions
Data List?
YES <NO>
ABSLT TPS(%)
ENGINE(RPM)
~
~
[
~
~