Table of Contents
Advertisement
Chrysler Diagnostics
Use the UP/DOWN arrow keys to scroll
through the codes. Write down the
codes for reference or print them later.
The DTCs are categorized by ENG (engine) or TRANS (transmission). The
Chrysler MIL code (3-digit) and SAE code (5-digit) follow on the first line.
ENG:
EVAP Purge Solenoid
Circuit
There may be times where only one or both display. Dashes display if the DTC
type does not exist.
ENG:
Boost Limit
Exceeded
Note the codes and press BACK to return to the Chrysler Functions list.
READ TEMPORARY CODES
For JTEC and SBEC III Equipped Vehicles Only.
The Read Temp Codes (Read Temporary Codes) function is used on vehicles
equipped with Jeep and Truck Engine Controllers (JTEC) and SBEC version III
modules. The function enables the tool to retrieve and display all DTCs that
failed one trip but did not turn on the MIL light. If the vehicle does not support
7
this function, then the tool will not display it.
Select Read Temp Codes from the
Chrysler Functions list and press
ENTER.
!
CAUTION
Next, turn the ignition key On-Engine can be Off or Running.
Once the tool has completed reading the temporary DTC s, one of two screens
display:
System Pass:
No Faults Detected.
7 – 2 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
31/P0443
7/----
Keep hands and Tools away from fan and engine during
test.
ENG:
EVAP Purge Solenoid
Circuit
TRANS:
Battery
Disconnected
~
(In Last 50 Cycles) ~
ENG: ---/P0010
Camshaft Position
Actuator A - Bank 1[
~
Circuit Malfunction ~
Chrysler Functions
1)Read Codes
` 2)Read Temp Codes [
3)Erase Codes
Use
Write Down Codes
For Reference
~
31/P0443
18/P1792
To View Code.
~
]
[
]
?
~
~
Advertisement
Table of Contents
