Table of Contents
Advertisement
Ford Enhanced (OBD II) Diagnostics
Erase Codes
Refer to "Erase Codes" on page 4-5 of Global OBDII Diagnostics. Perform
this KOEO. After erasing the DTCs, verify new ones have not been set using
the Read All DTC function.
IMPORTANT
View Data
The View Data function allows you to view the vehicle's Parameter
Identification (PID) data in real time. As the computer monitors the vehicle, the
information is simultaneously transmitted to the scan tool. Apart from Read
Codes, View Data is the most useful diagnostic function for isolating the cause
of a vehicle driveability problem. View data is also used for observing sensor
data and the status of switches, solenoids, and relays.
Select View Data from the Ford
Function List and press ENTER.
Ford arranges the PIDs in six groups:
Standard Info: viewing of analog
sensor signals, such as
measured voltage from O2
sensors, temperature sensors,
and air flow sensors.
O2 Sensor Info: viewing oxygen sensor information.
Misfire Info: viewing of cylinder misfire information.
Auto Trans Info: viewing of automatic transmission information.
Man Trans Info: viewing of manual transmission information.
A/C Info: viewing of air conditioning information.
After selecting a group, the scan tool
asks the vehicle to provide the PIDs it
supports for that group.
The scan tool displays a menu with
display options. Use the UP/DOWN to
select an option and press ENTER.
Refer to "Viewing Data" on page 3-11
to setup the data list.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 6 – 23
Until all monitors have ran the absence of a Diagnostic Trouble
Code (DTC) does not mean the fault has been fixed.
Ford Function List ?
5)Erase Codes
` 6)View Data
7)View Freeze Data ~
Data Group
` Standard Info
O2 Sensor Info
Misfire Info
Validating PID Map
PID 23 of 99
Please Wait
Select Data To View
` Entire Data List
Custom Data List
View Data Setup
]
[
?
[
6
~
~
Advertisement
Table of Contents
