Aruba AP-375EX Installation Manual page 11

Compliance is based on the use of Aruba approved accessories. Refer to the ordering guide for this access
point at
Use of accessories, transducers and cables other than those specified or provided by the manufacturer of this
!
equipment could result in increased electromagnetic emissions or decreased electromagnetic immunity of this
equipment and result in improper operation.
CAUTION
Portable RF communications equipment (including peripherals such as antenna cables and external antennas)
!
should be used no closer than 30 cm (12 inches) to any part of the access point. Otherwise, degradation of the
performance of this equipment could result.
CAUTION
The emissions characteristics of this equipment make it suitable for use in industrial areas and hospitals (CISPR
11 class A). If it is used in a residential environment (for which CISPR 11 class B is normally required) this
equipment might not offer adequate protection to radio-frequency communication services. The user might
need to take mitigation measures, such as relocating or re-orienting the equipment.
Radio Type Frequency Range
BLE
802.11
802.11
802.11
802.11
802.11
Actual output power values will depend on national restrictions and the antennas used.
Complies with:
Immunity:
Electrostatic discharge:
Radiated RF EM fields:
Proximity fields from RF wireless communication
equipment:
RATED power frequency magnetic fields:
Electrical Fast Transients:
Surges (line-to-line):
Aruba AP-375EX and AP-377EX Outdoor Access Points
www.arubanetworks.com.
2400-2483.5MHz
2400-2483.5MHz
5150-5250MHz
5250-5350MHz
5500-5700MHz
5725-5850MHz
Power (EIRP) Modulation
<10dBm GFSK
20dBm CCK, OFDM
23dBm OFDM
23dBm OFDM
30dBm OFDM
36dBm OFDM
| Installation Guide
Emissions - CISPR11/EN55011, Group 1,
Class B
+/-8kV contact/ +/-15kV air
80MHz - 2.7GHz, 3V/m
per Table 9 of the IEC/EN 606010-1-2
30A/m
+/-2kV
+/- 0.5, 1.0
11