How To Use; Filling The E-Juice; Step2: Install The Tank; Step3: Power On The Device - Vaporesso LUXE NANO User Manual

HOW TO USE

STEP1 : FILLING THE E- JUICE
Uncrew the drip tip directly,then you
can fill your favorite E-juice through the
opening.

STEP2: INSTALL THE TANK

1) When in SS/NI/TI (VT)mode,atomizer's
type need to be reganized when a new
one is installed.
2) Suggested mode for different coil: VW-N mode for tank with QF MESHED and QF
STRIPS coil , SS(VT) mode for SK CCELL coil.

STEP3: POWER ON THE DEVICE

1)Turn device on by pressing the power button 5 times in 2 seconds, repeat to power
off.
2)For your safety, If you vape continuously for more than 10 seconds, it will display
"10s time over"and device will stop working temporarily.
3)3 press of MODE button is request when you enter MENU after unit waken up from
sleep.
2 English