Vaporesso Target MINI II - Vape Kit Manual

Please read this manual carefully before using to ensure best experience. If you require additional information or have any question about this product, please contact our local distributors or contact us through website: www.vaporesso.com

OVERVIEW

Target MINI II with VM Tank 22

SPECIFICATION

Target mini II MOD:

• Dimensions: 37.2 *25.7*63.0mm
• Net weight: 112g
• Output wattage: 5~50W
• Resistance: 0.03~5Ω
• Battery: 2000mAh Built-in
• Charging current: 2A/5V
• Display: 0.66" OLED
• Battery Compatibility: 510

VM Tank 22:

• Dimensions: ø22.2*48.7mm
• Capacity: 2ml
• Coil and Recommended wattage:
  EUC CCELL Coil: 1.0 Ω,10~13W (pre-installed)
  EUC MESHED Coil: 0.6 Ω,16~22W

USE INSTRUCTION

Filling the E-juice and install tank

Unscrew the drip tip directly, then you can fill your favorite E-juice through the opening and following below to replace coil or glass.

1. Filling E-Juice
   
2. Replace coil
   
3. Replace glass
   

Main screen

Lock and unlock button

• Continually 5 press of fire to turn on and off
• Continually 3 press of fire to unlock/lock.
• Continually 3 press of mode to lock/unlock mode button.

Choose your mode

• VW-H /VW-N /VW-S (Variable Wattage mode - high/normal/soft): it will automatically select the adequate average wattage for your atomizer If you switch between different ohms resistance.
• CCW (Custom Curve of Wattage mode): To use the up and down buttons to customize you own curve of wattage output line, move to the next bar with a quick press of the fire button, press the mode button to save and exit when setting is done.
• SP (Super Player mode): In this mode, it will support broader resistance range from 0.03Ω to 5Ω, which is adaptive to mainstream RDA tanks.
• VV (Variable Voltage mode): You can manually adjust the voltage to match the resistances of the coil you use, the higher resistance of the coil you use, the higher voltage it require correspondingly.
• CCV (Custom Curve of Voltage mode): In this mode, you can use the up and down buttons to customize you own curve of voltage line, move on to the next bar with a quick press of the fire button, press the mode button to save and exit when all modifications are done.
• SS/NI/TI: Variable temperature control mode for Stainless Steel/Nickel/Titanium material (Auto Function enabled). the device can separately support Nickel 200, Titanium, and Stainless Steel coils smartly, it will intelligently adjust temperature control parameters based on the heating wire material's resistance value you use, also it allows you to change the startup wattage.
• M1/M2 (Temperature Coefficient of Resistance) You can choose your own manual setting and set the TCR at different values within proper range, below show the recommend range of the heating material:
  
• BP (Bypass mode): Direct output voltage mode depends on battery level, supported coil resistance range: 0.05-5ohm.
• SET: System setting, including DEFAULT/ TIME SET/ BRIGHTNESS/ PUFF COUNTER/ SMART ON OFF/ AUTO ON/OFF/ SCREEN/ VERSION.
• SMART ON/OFF: It is a advanced Variable Wattage mode, when smart function is enable, it can change intensity according to the coils resistance levels within a safe limit in VW-H/N/S mode.
• AUTO ON/OFF: The Auto function taking away any operation difficulties switching between VW-H and VW-N or between VT-H and VT-N.

• Please turn off the device when it is not in use.
• Do not leave the charging device unattended.
• Do not drop, throw or abuse your device, it may cause damage.
• Please use a standard USB output charger in proper charging Current and Voltage range.
• Keep away from water or any flammable gas, liquid.
• Do not exposure to direct sunlight, dust, moisture or mechanical shock.
• Do not exposure the device to extreme temperature. (Applicable temperature range: -10~60 ℃ /14~140 ℉ while using, 0~+55℃ /32-131 ℉ while charging, -10~45℃ /14~113 ℉ while storing).
• EEE Recycling: the product should not be treated as household waste, instead it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
• Battery Recycling: the product battery should not be treated as household waste, instead it should be handed over to the applicable used battery collection point for recycling.
• Only have your device repaired by Vaporesso. Do not attempt to repair it by yourself as damage or personal injury may occur.