Vaporesso LUXE X - Pod System Manual

SPECIFICATION

Dimensions: 98 x 21.5 x 21.6 mm
POD Capacity: 5ml/2ml
Compatible POD:
LUXE X 0.4Ω MESH POD(32W)
LUXE X 0.8Ω MESH POD(16W)
Battery Capacity: 1500mAh
Output Power: 40W MAX
Charging Current: DC 5V/1.5A,Type-C
Display: 3 x LED Light

OVERVIEW

PACKING LIST

1 x VAPORESSO LUXE X Battery
1 x VAPORESSO LUXE X 0.4Ω MESH POD(5ml/2ml)
1 x VAPORESSO LUXE X 0.8Ω MESH POD(5ml/2ml)
1 x Type-C Cable
1 x User Manual
1 x Warranty Card

USER INSTRUCTIONS

1. Replace the POD
   • Take out the used POD from the battery;
   • Install a new POD to the battery and make sure they are firmly connected.
2. Fill the E-liquid(Refer to FIGURE 1)
   
   • Take out the used POD from the battery and pull out the silicone plug from the bottom of the POD;
   • Fill e-liquid through the hole
   • Put the silicone plug back in place firmly after filling is finished.
   • Please wait 5 minutes for the e-liquid to soak into the coil completely.
3. Adjust the Airflow(Refer to FIGURE 2)
   
   To adjust the airflow volume, try rotating the POD 180° and inserting it. There are two looser or tighter airflow volume for selecting.
4. Power on the Device
   Click the power button 5 times in 2 seconds to power on or power off the device.
5. Start Vaping
   Press the power button to enjoy extraordinary vaping experience.
6. Battery Level

LED	Battery Status
	60%-100%
	30-60%
	≤30%

7. Charge the Battery
   After connecting the Type-C cable to the battery, the battery indicator and remaining charging time will be showed on the screen.
8. Safety Mode
   If the vaping time over 8 seconds, the power level LED light breathing 3 times and the device will be powered off automatically, press power button 5 times constantly to power on again.