300 l capacity
(cont.)
9. Affix type plate
.
C
Installing the sensor well and the cylinder temperature sensor
Note
The sensor retainer is in the sensor well.
2.
3.
Fig. 5
1.
4.
1. Extract the sensor retainer.
2. Fit the sensor to the outside of the sensor retainer
contact spring (not in the groove).
Note
■
The sensor must sit flush with the front of the
spring.
Never wrap insulating tape around the sensor.
■
3. Insert the sensor retainer with sensor into the sen-
sor well as far as it will go.
9