Fitting The Cover; Installing The Cylinder Temperature Sensor - Viessmann VITOCELL 140-E Installation And Service Instructions Manual
Solar buffer cylinder
Hide thumbs
Also See for VITOCELL 140-E:
Table of Contents
Advertisement
Vitocell with fitted Solar-Divicon
Fitting the cover
2.
1.
Fig. 26
Installing the cylinder temperature sensor
The cylinder temperature sensor is supplied in the
■
control unit pack.
Position the sensor on the outside of the sensor
■
retainer contact spring (not in the groove) so that it is
flush with the front of the spring.
(cont.)
Never wrap insulating tape around the sensor.
■
Insert the sensor retainer with sensor into the sensor
■
well as far as possible.
Installation sequence
27
Advertisement
Table of Contents
