Connectiον & Operation - Edision HDMI Modulator Lite Quad User Manual

►CONNECTIΟΝ & OPERATION
1. Connect up to 4 HDMI Cables from up to 4 HDMI source devices to the respective HDMI Modulator HD
inputs (HD IN 1, 2, 3, 4).
2. Connect an RF Cable from RF OUT to the RF Network.
3. Connect the power supply to the HDMI Modulator.
4. Select the desired RF Channel outputs from the modulator display 1 and 3.
5. If there are more than one Quad-HDMI Modulator units in the same installation, select ID for each output
channel. The ID selection is made for each quad modulator unit in its own 4 displays, separately in each display.
6. Proceed with channel scanning on your TV/STB