Reichert Lensometer LensChek Plus User Manual page 16

Instrument Setup
Instrument Settings
Setup Screens
(continued)
The fourth page of the Setup Screen contains the following
categories:
Brightness Sets brightness of screen
(7 Preset Settings)
Sleep Selects time to activate sleep mode
(Off / 3min / 5min / 10min)
Note: When the unit goes into sleep mode, the
Tone Enables an audible tone to sound when pressing
the buttons. (Off / On)
Language
Selects language displayed on screen
(Eng / Fra / Deu / Esp / Por / Ita / Chinese)
Defaults Highlight Reset All and press the Enter icon to change all settings back to defaults.
(Reset All)
16
(continued)
(continued)
power light will blink. This is to indicate it is
in sleep mode. Pressing any button will
wake up the unit and turn it back on.
Figure SU-13 Page 4, Setup Screen
15180-101 Rev. F