Description; Basic Equipment - Common Features Of The Model Series - Eaton XV360 Manual

1. Description

1.1 Basic equipment - common features of the model series

1.1 Basic equipment - common features of the model series
XV360 Single Touch Display units are designed to be used as control and monitoring
devices. In addition, they can also be used as an HMI (human-machine interface) when
upgraded with an additional PLC functionality.
The devices require little space and are intended for front flush mounting, meaning that
they are inserted into the corresponding enclosure from the front.
XV-363 units can also be used in portrait mode.
All XV-363 are equipped with:
1. Powerful CPU: ARM Cortex-A9 800 MHz
2. 1 GB internal memory and 128 kB non-volatile data memory
(DRAM: 512 MB RAM, flash memory: 1 GB SLC, NVRAM: 128 kB Retain)
3. Industrial Infra-red touch display with Laminated safety glass, non-reflective, in
aluminum bezel
4. SD/SDHC memory card slot
5. Operating System Windows Embedded Compact 7 pro
6. Every Human-machine interface comes with a comprehensive basic con-
figuration with integrated interfaces.
Two Ethernet ports (10/100 Mbit/s) for use as a communication or field bus
l
interface
One USB 2.0 host port for memory and other accessories, full power (500
l
mA)
One USB device 2.0,
l
One standard RS-232 (COM1) port for communicating with PLCs or devices,
l
One standard RS-485 (COM2) port for communicating with PLCs or devices,
l
One standard CAN interface for the CANopen protocol, J1939 protocol
l
7. Available PLC functionality upgrade
In order to upgrade a unit to an HMI that can be used for control and operating
purposes, use license product certificate LIC-PLC-A, part No. 181585.
XV360 Single Touch Display 07/19 MN048025EN www.eaton.eu
1. Description
13