Table of Contents
Advertisement
FAN SETUP
— interval timer turning on and adjustment is performed with the potentiometer Т
on
set the potentiometer Т
on
operation for 6 hours, rotation of the potentiometer for 2/3 clockwise sets the interval timer operation for 12 hours, and
rotation of the potentiometer clockwise in the rightmost position sets the interval timer operation for 24 hours.
— To adjust the fan turn-off delay time, turn the control knob Т
decrease the turn-off delay time respectively, adjustable from 2 up to 30 minutes.
— To adjust the humidity set point turn the control knob Н clockwise to increase and counter-clockwise to decrease the
humidity sensor set point, adjustable from 60 % up to 90 %.
Caution! If the switch is turned off or the indoor humidity falls below the set point within 60 seconds after
activation of the switch or the humidity sensor, the fan continues operation at low speed.
The fan delivery set includes a specially designed plastic
screwdriver for fan settings adjustments.
Use it to change the turn-on and turn-off delay time and the
humidity set point.
into the leftmost position. Rotation of the potentiometer for 1/3 clockwise sets the interval timer
DO NOT USE A METAL SCREWDRIVER, KNIFE, ETC. FOR ADJUSTMENT
OPERATIONS NOT TO DAMAGE THE CIRCUIT BOARD.
clockwise to increase and counter-clockwise to
off
11
. To turn the interval timer off,
on
H
For TH
60%
90%
-
T
+
i
For T
6 hours
12 hours
O
24 hours
T
o
2 min
30 min
EN
Advertisement
Table of Contents
