1. Manuals
  2. Brands
  3. VIGO Manuals
  4. Other
  5. VG06042A
  6. Installation manual

VIGO VG06042A Installation Manual

Hide thumbs Also See for VG06042A:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual
VIGO INDUSTRIES INSTALLATION GUIDE FOR
SHOWER ENCLOSURE (MODEL VG06042A)
! SAFETY PRECAUTIONS
This Installation Guide uses the following symbols to indicate important information.
Always observe the instructions indicated by these symbols.
!
WARNING
Instructions that, if ignored, could result in death or serious personal injury caused by
incorrect handling or installation of the product. These instructions must be observed for
safe installation.
! CAUTION
The instructions can not be provided for any other installation other than that of the Vigo brand.
The warranty will be voided if the following was not performed properly.
IMPORTANT
Maintenance and other important non-personal injury and non-material damage instructions
or statements that should be observed.
It is highly advised to dry fit the unit prior to any installation.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VG06042A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for VIGO VG06042A

Summary of Contents for VIGO VG06042A

  • Page 1 These instructions must be observed for safe installation. ! CAUTION The instructions can not be provided for any other installation other than that of the Vigo brand. The warranty will be voided if the following was not performed properly. IMPORTANT Maintenance and other important non-personal injury and non-material damage instructions or statements that should be observed.
  • Page 2 INSTALLATION INSTRUCTIONS FOR SHOWER DOOR Handle assembly (1pc) OWNER'S MANUAL Side seal strip w/out bump (1pc) Door bottom seal strip (1pc+1pc extra) PLEASE READ INSTRUCTIONS BEFORE PROCEEDING Door threshold (1pc) Door side seal strip (1pc) Packing List Hex screw 1 5/8" (2pc) 1.
  • Page 3 5. FRONT FIXED PANEL 3. TURNING HINGE 4. TURNING HINGE 1. TURNING HINGE 2. TURNING HINGE MIRRORED BASE BASE MIRRORED 98041 98042 98043 98044 97023 8. HANDLE ASSEMBLY 6. DOOR 7. SIDE SEAL STRIP - 73" 9. SIDE SEAL STRIP 10.
  • Page 4 HEIGHT LIST DIMENSION "A" DIMENSION "B" CONFIGURATIONS (FIXED PANEL) DIMENSIONS (DOOR) 1 (A or B)* (30"-36") x 72" 28 3/4" x 71 1/4" 72" 7 7/8" x 72" 2 (A or B) 34 3/4" x 71 1/4" 72" (36"-42") x 72" 7 7/8"...
  • Page 5 BEFORE STARTING Compare items on your invoice with what you have received. Carefully review the Packing List on page 2. If any items are missing, please call Vigo Industries at 1-866-591-7792. REQUIRED TOOLS: - Square and/or Phillips #1 and #2 screwdriver - Flat head screwdriver - Electric drill;...

  • Page 6: Installation Steps

    IMPORTANT Prior to any installation, mark lines on the floor and wall for proper dry fit. Although the panels are parallel the fixed panel does not sit in alignment with the door panel. Proper planning is imperative for proper installation. [SEE FIG.1A] INSTALLATION STEPS USING TYPE A FOR ILLUSTRATION) INSTALLING THE FRONT FIXED PANEL...

  • Page 7: Installing The Door Panel

    INSTALLING THE TURNING HINGE BASE Unscrew the plate on the turning hinge base mirrored (#2) and mount the turning hinge base mirrored into the lower corner of the front fixed panel (#5). Mark a hole on the floor for the mounting screw for the turning hinge base mirrored. Remove the turning hinge base mirrored and drill a hole into the floor on the marked location.

  • Page 8: Installing The Handle

    INSTALLING THE STRUCTURAL ARM Attach the structural arm (#30) to the top turning hinge base (#1) . Note that the structural arm has an adjustable screw hole of 1/2" length. This will allow for flexibility and proper install placement [SEE FIG. 5 & 5A]. Mark two holes on determined locations on the wall for the mounting screws and insert plastic anchors (#16) into them.

  • Page 9: Top View

    INSTALLING SEAL STRIPS 1. Install the door side seal strip (#12) to the door when the door edge towards the wall is away from the turning hinge base (#1). If maximum length of the shower enclosure is required and the door edge is within rubbing distance of the glass support install the side seal strip without bump (#9) .
  • Page 10 INSTALLING SCREW COVERS Install screw covers (#24) to the unit. Please pay attention that there are three types of covers. Type A is for structural arm (3pc). Type B is for turning hinges (6pc). Type C is for glass supports (4pc). APPLYING THE SILICONE Apply clear silicone caulking to the inside between the wall and side seal strip.
  • Page 11 Subject to the Warranty Service provision below, any product reported to the authorized dealer or to VIGO as being defective within the warranty period will be repaired or replaced (with a product of equal value) at the option of VIGO. This warranty extends to the original owner or end-user and is not transferable to a subsequent owner.

Table of Contents