Changing Screen Size; Connecting Power Supply - Philips NeoPix Easy NPX440 User Manual

2 To adjust projection to the correct position,
press , and go to SETUP - Panel Flip
Rotate.
Rear table
1 Place the projector on a table behind the
projection screen. A special rear projection
screen is required.
2 To adjust projection to the correct position,
press , and go to SETUP - Panel Flip
Rotate.
Rear ceiling
1 Mount the projector on ceiling with upside
up behind the projection screen. To mount
the projector on ceiling behind the screen,
a projector mount and a special rear
projection screen is required.
2 To adjust projection to the correct position,
press , and go to SETUP - Panel Flip
Rotate.
8

Changing screen size

The projection screen size (or size of images) is
determined by the distance between the lens
of the projector and the projection surface.
• The projection image size is to up to
80'' (200 cm).
• The projection distance is 80 cm - 200 cm
/ 24"- 60".

Connecting power supply

CAUTION!
Always use the
projector on and off.
1 Fix an appropriate plug (EU, UK, US) onto the
round base of the power adapter by aligning
the pins and holes.
• To detach the plug from the power
adapter, hold down the tab at the edge of
the round base, and simultaneously turn
and unlock the plug from the round base
of the power adapter.
US EU
2 Connect the included power adapter to the
socket on the projector, and then to the
wall outlet.
• The LED on the projector turns red.
AV MICRO SD HDMI USB
button to turn the
UK
b
a
DC
Philips · NeoPix Easy