Changing Screen Size; Connecting Power Supply; Preparing The Remote Control - Philips NeoPix Prime NPX540/INT User Manual

2 To adjust projection to the correct position,
press , and select Settings - Advanced
Settings - Projection Location - Front
Ceiling.
Rear table
1 Place the projector on a table behind the
projection screen. A special rear projection
screen is required.
2 To adjust projection to the correct position,
press , and select Settings - Advanced
Settings - Projection Location - Rear.
8

Changing screen size

The projection screen size (or size of images) is
determined by the distance between the lens
of the projector and the projection surface.
• The projection image size is to up to 120''
(300 cm).
• The projection distance is 80 cm - 200 cm
/ 24"- 60".

Connecting power supply

CAUTION!
Always use the
projector on and off.
1 Select a supplied power cable with an
appropriate power plug (EU, UK, US, CH).
2 Connect the power adapter with the power
cable to the socket on the projector, and
then to the wall outlet.
• The LED on the projector turns red.
AUX MICRO SD
c
Preparing the remote
control
CAUTION!
The improper use of batteries can
lead to overheating, explosion, risk of
fire and injury. Leaking batteries can
possibly damage the remote control.
Never expose the remote control to
direct sunlight.
Avoid deforming, dismantling or
charging the batteries.
Avoid exposure to open fire and water.
Replace empty batteries immediately.
Remove the batteries from the remote
control if not in use for long periods of
time.
button to turn the
HDMI 1 HDMI 2 USB DC
b
a
Philips · NeoPix Prime